| BUILDER |  | AIRCRAFT / ENGINE |  | DATE UPDATED |  | STATUS |  | NOTES |
| Norm Allen |  | GlaStar |  | 2007-11-08 |  | FLYING |  | The GlaStar is flying regularly. |
| Norm Allen |  | RANS S-6 |  | 2009-07-01 |  | FLYING |  | Norm has been flying his LSA RANS around... looks like a ton of fun! |
| Valkaria Bob |  | B-12 Peacemaker (1/3 scale replica of B-36 bomber) 6 x Pratt&Whitney R-2800 + 4 Solar Turbines |  | 2010-01-12 |  | BUILDING |  | VB has been taxi-testing. Sadly, the plane is too large for the current taxiways and must back-taxi on the runway, and the propwash from the first run-up blew seventeen planes from their tie-downs (most of them were eventually found in Osceola county). Bob figures that only four more mortgages on his house should be sufficient to pay for the fuel for the first 10 hours of test flying. |
| Matthew Borowski |  | Pedal P-51 Mustang Flintstone Propulsion Unit |  | 2009-03-12 |  | FLYING |  | Matthew took his checkride and now has his SP (Sport Pedaler) certificate. |
| Steve Borowski |  | Kolb Kolbra Rotax 912 |  | 2007-11-25 |  | FLYING |  | Steve's Kolb is flying again and has transitioned to an E-LSA. Matthew likes to help dad out around the hangar! |
| Steve Borowski |  | CGS Hawk UL Rotax 503 |  | 2007-11-25 |  | BUILDING |  | Steve's Hawk is a restoration project at this point, it was crunched by the previous owner in a bad landing. |
| Steve Bowman |  | Moni Motorglider |  | 2007-12-03 |  | FLYING |  | Steve's little motorglider is a nice, lightweight plane that can actually thermal. |
| Steve Bowman |  | Pazmani PL-4 |  | 2007-12-03 |  | FLYING |  | Many folks have mistaken Steve's Paz for some kind of factory-built airplane. |
| John Carpenter |  | Zenith Zodiac CH-601 HDS Subaru EA-81 |  | 2010-01-11 |  | MAINTENANCE |  | *** FOR SALE!!! *** John's plane has a new engine (due to a precautionary landing due to overheating) and a new prop (unrelated to the new engine), and should be back in the air soon. John enjoys the plane and it's not affected by the much-talked about ADs... it's only for sale because John has the itch to move to a high-wing design. |
| Jim Daron |  | Pietenpol Air Camper Continental O-200 |  | 2007-11-08 |  | FLYING |  | Jim's Air Camper has been flying with no major issues. It features a few mods including a side door for the front cockpit and a retractable step for the rear pit. |
| Walter Eisenmann |  | Sonex |  | 2010-01-11 |  | FLYING |  | Walt has been regularly flying his scratch-built Sonex with his own VW engine conversion. |
| Francis Herr |  | Van's RV-9 |  | 2007-11-08 |  | BUILDING |  | Working on the fuselage. |
Walt Hewett and Joe Blaha |  | Van's RV-10 |  | 2007-11-08 |  | BUILDING |  | Walt and Joe are currently working on the fuselage. |
| Travis Holland |  | Velocity |  | 2007-11-08 |  | BUILDING |  | Working on the wings. |
| Pete Mickos |  | Fly Baby Bipe |  | 2007-12-03 |  | FLYING |  | This unusual iteration of the famous Fly Baby is a neat little biplane! |
| Tim Miller |  | Legal Eagle |  | 2007-11-08 |  | BUILDING |  | Tim is in the early stages of this project. |
| Don Nelson |  | Mitchell Wing |  | 2007-11-25 |  | BUILDING |  | The Mitchell Wing is being restored to flying status. It's currently waiting to be covered. |
| Herschel Walls |  | Van's RV-10 |  | 2007-11-08 |  | BUILDING |  | Working on the fuselage. |
| Linn Walters |  | Van's RV-10 |  | 2007-12-03 |  | BUILDING |  | Linn is working on his RV-10. |
| Linn Walters |  | Pitts S1-S O-360 |  | 2007-11-08 |  | MAINTENANCE |  | Linn's Pitts is being worked on. As usual :) |
| Mike Whaley |  | OV-10 Bronco (Scaled, LSA-legal replica) 1x Corvair |  | 2007-12-03 |  | DESIGN STAGE |  | Still in the conceptual stage, but the basic requirements and trial structural layouts completed. Features: Legal LSA, reduced scale, accurate scale outlines as far as possible, 2-seat, single pusher Corvair engine, easy to build, forgiving flight characteristics, (probably) non-aerobatic, low-cost, ballistic chute, eye catching! |
| Mike Whaley |  | Pietenpol Air Camper Corvair |  | 2007-11-08 |  | BUILDING |  | Mike went to Brodhead and bought a set of really nice CNC aluminum tail hinges... therefore, the project is finally, officially started! |